Laser, radiofrequency or glue: how the doctor chooses for your veins
Laser, radiofrequency, glue and foam all close varicose veins through a pinhole. How they differ, what each feels like, and why the scan decides.

Search for varicose vein treatment and you will find each clinic praising a different method. In practice, the modern methods are closer to each other than the advertising suggests. They all close the faulty vein from inside, through a needle puncture, and the blood then flows back up through healthy veins. The difference is how they close it.
Laser (EVLA)
A thin laser fibre is passed into the vein under ultrasound guidance. The leg is numbed along the vein, and the fibre is slowly pulled back while the laser heats and seals the vein. It has been used for varicose veins for over two decades and is one of the most studied methods.
Radiofrequency ablation (RFA)
The same idea, with a catheter that heats the vein wall using radiofrequency energy instead of laser. Trials comparing the two show similar results for closing the vein. Some studies found slightly less aching in the first days after radiofrequency, but the difference is small.
Glue closure
A medical adhesive is placed inside the vein through a catheter, and the vein is pressed shut so the walls stick together. No heat is used, so the leg needs fewer numbing injections along its length. It is a newer method than laser and radiofrequency.
Foam sclerotherapy
A medicine mixed into a foam is injected into the vein under ultrasound. It irritates the lining so the vein closes and slowly fades. It is well suited to smaller or twisty veins that a fibre or catheter cannot pass along, and to side branches after the main vein has been treated. Some people need more than one session.
Side by side
- Laser: local anaesthetic, pinhole, about an hour, home the same day, back to work in one to three days.
- Radiofrequency: local anaesthetic, pinhole, about an hour, home the same day, back to work in one to three days.
- Glue: local anaesthetic, pinhole, under an hour, home the same day, often back to work the next day.
- Foam: an injection, 15 to 30 minutes, home the same day, back to work the next day.
- Open surgery (stripping): spinal or general anaesthesia, cuts at the groin and leg, one to two days in hospital, two to four weeks to recover.
These are typical figures. Your own will depend on your veins and your health.
What guidelines say
NICE, which sets guidance for the NHS in the UK, advises heat-based treatment (laser or radiofrequency) first, then foam sclerotherapy if heat is not suitable, and open surgery only if neither is suitable. Heat-based treatment usually means a quicker return to normal activity than surgery.
How the choice is actually made
The Doppler scan decides. It shows which veins leak, how wide they are, how straight their path is, and how close they run to the skin and to nerves. A wide, straight vein suits laser or radiofrequency well. A twisty vein or a branch may suit foam. A vein that runs very close to the skin, or a person who wants to avoid the numbing injections along the leg, may make glue a good option. Often the plan combines two methods: the main vein closed with heat or glue, and branches treated with foam.
Your general health and medicines matter too, as does whether you have had a clot before. The doctor should explain why a method suits you. If a clinic offers only one method for everyone, it is fair to ask why.
Questions worth asking at your consultation
- Which veins are leaking on my scan?
- Which method do you suggest, and why that one for my veins?
- Will the side branches be treated in the same sitting?
- Who does the procedure, and where?
- When is the follow-up scan?
At Adhventha Hospital, the interventional radiology team offers laser, radiofrequency, glue and foam, and does the Doppler scan in the same visit as the consultation. To book an appointment, call 080 8897 6259.



